Dukane DPC II Plus Manuel d'utilisateur télécharger pdf (Page 42)

Dukane Manual Part No. 403–566–01

DPC

™

II Plus and EZ Welder System – User’s Manual

System Power Output Display

The tricolor System Power Output Display indi-

cates the percentage of ultrasonic power being

drawn by the load.

Green Eight green vertical bars indicating

10% to 80% power output are dis-

played during normal operation. Fig-

ure 4-5 shows the display indicating

80% output power.

Yellow Two yellow bars for 90% and 100%

power output warn that the genera-

tor is operating near its maximum

rated output.

Red The last red bar indicates that the

generator is in an overload condition

delivering more than its rated out-

put power. Figure 4-6 shows the red

overload and two yellow warning in-

dicators. The red warning indicator

lights up just prior to an overload

condition. The ultrasonic signal is

shut down when an overload condi-

tion occurs.

GREEN

YELLOW

RED

Figure 4–6 Warning Indicators

Figure 4–5 Normal Operation

NOTE

The available output power is directly propor-

tional to the Amplitude setting.

Example: A 2200 Watt rated DPC set to 80%

Amplitude will overload at 1760 Watts.

(2200W

0.80 = 1760 Watts)

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 189 190

Pas de commentaire

Dukane DPC II Plus Manuel d'utilisateur Page 42